PDU108H Datasheet ECL-INTERFACED PROGRAMMABLE DELAY LINE

Manufacturer: Data Delay Devices

PDU108H ecl-interfaced programmable delay line by Data Delay Devices - Datasheet Preview

Datasheet Details

Part number	PDU108H
Manufacturer	Data Delay Devices
File Size	64.29 KB
Description	ECL-INTERFACED PROGRAMMABLE DELAY LINE
Datasheet	PDU108H Datasheet

General Description

The PDU108H-series device is a 3-bit digitally programmable delay line.

The delay, TDA, from the input pin (IN) to the output pin (OUT) depends on the address code (A2-A0) according to the following formula: TDA = TD0 + TINC * A PIN DESCRIPTIONS IN OUT A2 A1 A0 ENB VEE GND Signal Input Signal Output Address Bit 2 Address Bit 1 Address Bit 0 Output Enable -5 Volts Ground where A is the address code, TINC is the incremental delay of the device, and TD0 is the inherent delay of the device.

The incremental delay is specified by the dash number of the device and can range from 0.5ns through 50ns, inclusively.

Overview

www.DataSheet4U.com PDU108H 3-BIT, ECL-INTERFACED PROGRAMMABLE DELAY LINE (SERIES.

Key Features

Digitally programmable in 8 delay steps Monotonic delay-versus-address variation Precise and stable delays Input & outputs fully 10KH-ECL interfaced & buffered Fits standard 16-pin DIP socket GND ENB 1 2 16 15 data 3 ® delay devices, inc.

More Datasheets from Data Delay Devices

Part Number	Description
PDU1016H	ECL-INTERFACED PROGRAMMABLE DELAY LINE
PDU10256H	ECL-INTERFACED PROGRAMMABLE DELAY LINE
PDU1032H	ECL-INTERFACED PROGRAMMABLE DELAY LINE
PDU1064H	ECL-INTERFACED PROGRAMMABLE DELAY LIN
PDU138	3-BIT PROGRAMMABLE DELAY LINE
PDU13F	3-BIT PROGRAMMABLE DELAY LINE
PDU14F	4-BIT PROGRAMMABLE DELAY LINE
PDU15F	5-BIT PROGRAMMABLE DELAY LINE
PDU16F	6-BIT PROGRAMMABLE DELAY LINE
PDU17F	7-BIT PROGRAMMABLE DELAY LINE